Blackmagicdesign Teranex 2D Processor, Installation And Operation Manual

Page: 711 / 969

Ancillary Data
Teranex processors support closed captions, timecode and video indexing in the ancillary data.
Closed Captions
Command Command Description
CC enabled: Enable Closed Caption processing. True=ON; False=OFF;
(Default = False)
CC input line: Analog CC input line selection. Range is 20 to 22. Default =
21
CC output line: Analog CC output line selection. Range is 20 to 22. Default =
21
CC service2 source: CC Service 2 selection; Values are CC2 (default) or CC3
CC service1 language: Service 1 Language selection. Values are:
English (default), French, German, Italian, Spanish
CC service2 language: Service 2 Language selection. Values are:
English (default), French, German, Italian, Spanish
Timecode
Command Command Description
Timecode mode: Select the mode of the timecode generator. Values are:
Off, Input, InputRegen, Generate, JamSync
Timecode input line: Set the line on which the input timecode is located. The valid
range of values is format dependent. To set the unit to the
default automatic input detection mode, enter 0.
NTSC: lines 10-20
PAL: lines 6-22
1080 HD: lines 9-20
720 HD: lines 9-25
Timecode output line: Set the line on which the output timecode is located. The
valid range of values is format dependent. To set the unit to
the default output line, enter 0.
NTSC: lines 10-20 (Default = 14)
PAL: lines 6-22 (Default = 19)
1080 HD: lines 9-20 (Default = 9)
720 HD: lines 9-25 (Default = 9)
Timecode drop frame mode: Change the drop frame mode in valid output formats.
Values are: DF, NDF.
Timecode source: This command is only needed for the Teranex 3D.
Values are: VITC, LTC.
Timecode generate value: Set the start time of the output timecode generator,
expressed as HH:MM:SS:FF
Timecode jam sync value: Set the search value for the Jam Sync generator, expressed
as HH:MM:SS:FF
Timecode start source: Set the source of the timecode number used by the
generator. Values are: Input, User (where “User” is equivalent
to “Start Value” in the LCD Menu tree).
711 711
开发人员信息