Biotek Synergy H1, Operator'S Manual

Page: 19 / 190

Warning! Liquids. Avoid spilling liquids on the instrument; fluid seepage into
internal components creates a potential for shock hazard or instrument
damage. If a spill occurs while a program is running, abort the program and
turn the instrument off. Wipe up all spills immediately. Do not operate the
instrument if internal components have been exposed to fluid; contact BioTek
TAC.
Warning! Unspecified Use. Failure to operate the equipment according to
the guidelines and safeguards specified in this manual could result in a
hazardous condition.
Warning! Software Quality Control. The operator must follow the
manufacturer’s assay package insert when modifying software parameters
and establishing reading or dispensing methods.
Failure to conduct quality
control checks could result in erroneous test data.
Warning! Reader Data Reduction Protocol. No limits are applied to the
raw measurement data. All information exported via computer control must
be thoroughly analyzed by the operator.
Warning! Internal Voltage. Always turn off the power switch and unplug
the power supply before cleaning the outer surface of the instrument.
Warning! Potential Biohazards. Some assays or specimens may pose a
biohazard. This hazard is noted by the symbol shown here. Adequate safety
precautions should be taken as outlined in the assay’s package insert. Always
wear safety glasses and appropriate protective equipment, such as chemically
resistant rubber gloves and apron.
Warning! Pinch Hazard. Some areas of the dispense module can present
pinch hazards when the instrument is operating. The module is marked with
the symbol shown here. Keep hands and fingers clear of these areas when the
instrument is operating.
Precautions
The following precautions are provided to help avoid damage to the instrument.
Caution: Service. The instrument should be serviced by BioTek-authorized
personnel. Only qualified technical personnel should perform troubleshooting
and service procedures on internal components.
Caution: Spare Parts. Only approved spare parts should be used for
maintenance. The use of unapproved spare parts and accessories may result
in a loss of warranty and potentially impair instrument performance or cause
damage to the instrument.
Synergy H1 Operator's Manual
Precautions | xvii