773232AH
4-13
Specifications
Software Specifications
4
@PnDivider
Specifies the channel of the parameter n prism divider. Only present when the prism
dividers are specified in the software.
@PnGAIN
Amplifier Gain setting of a sensor associated with parameter n.
@PnQ
Sensor name for parameter n, from the Cytometer Control screen.
@PnU
Units for this parameter n.
@PnX
Linear calibration values in xx, yy order, for example: xx= channel number, yy =
channel value. When this value is “0.0, 0.0” the resolution of the data is used.
@PnZ
Calibration for parameter n is active. This value is always “ON”.
@RATIO_DENOMINATOR
Name of Parameter used as Ratio Denominator or “N/A” if ratio is not selected.
@RATIO_NUMERATOR
Name of Parameter used as Ratio Numerator or “N/A” if ratio is not selected.
@RATIODENOMINATORMUX
Internal Multiplexer address of the parameters used for the Ratio Parameter
Denominator.
@RATIONUMERATORMUX
Internal Multiplexer address of the parameters used for the Ratio Parameter
Numerator.
@REDLASERPOWER_END
Red laser power at end of acquisition.
@REDLASERPOWER_START
Red laser power at start of acquisition.
@REDLASERSHUTTER
Red laser shutter status.
@REDTARGETPOWER
Red laser target power.
@RESAVEDFILE
Displays Runtime Protocol if the current file is exactly as at the end of acquisition, if
any changes are made post acquisition and the LMD file is resaved, the new file
displays New Protocol.
@SAMPLEID1
User defined string.
@SAMPLEID2
User defined string.
@SAMPLEID3
User defined string.
@SAMPLEID4
User defined string.
@SETTINGSFILE
Instrument settings file used for acquisition.
@SETTINGSFILEDATETIME
The date and time of the instrument settings file used for acquisition.
@STOPREASON
Contains the reason why the acquisition was stopped. It can be one of the following
values:
“ERROR”: Instrument error occurred
“PROTOCOL”: Event count or acquisition time limit met.
“MANUAL”: User selected stop.
“MAX EVENTS”: Maximum events for the number of selected parameters reached.
“UNKNOWN”: The stop reason is unknown.
TESTFILE
Protocol file name.
TESTNAME
Protocol name.
@TUBENO
The tube number (location on the carousel) from which the data set was acquired.
@VIOLETLASERPOWER_END
Violet laser power at end of acquisition.
@VIOLETLASERPOWER_START
Violet laser power at start of acquisition.
Table 4.1
FCS 2.0 Keyword Information
FCS 2.0 Keyword
Key value
Summary of Contents for Navios
