Beckman Coulter Navios Instructions For Use Manual Download Page 373

Page: 373 / 586

773232AH

10-177

Using Navios Software

Quality Control Report

QC Levey Jennings Screen

on the Report Generator toolbar to display the QC Levey Jennings screen.

Instrument

Choose the instrument that you want to view QC data from.

Application

and choose an AutoSetup II application that is associated with a template.

NOTE

To view QC results that were run without being associated with an application (for example, Flow-

Check Pro QC results not scheduled when run), leave this option unchecked.

Data Table

Displays the information from the Levey Jennings plots in tabular format.

Summary of Contents for Navios











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Navios

Reviews:

Beckman Coulter Navios, Instructions For Use Manual, Page: 373 / 586

Search results

Summary of Contents for Navios

Reviews: