Beckman Coulter Navios Instructions For Use Manual Download Page 191

Page: 191 / 586

773232AH

8-13

Running Samples

Running Samples - Single Tube Mode

Close the MCL Tube Access door and

to begin processing samples.

During the sample cycle the following series of Cytometer status messages appears:

Awaiting Sample

Preparing Sample

Acquiring

Stopping.

Observe the Events/Sec counter on the

Status Bar

to monitor data acquisition.

NOTE

While running a Worklist, if the Tube ID in the Worklist does not match the bar code on the tube,

a system message appears. After you acknowledge the message, the mismatched tube is aborted
and the processing stops for the rest of the carousel.

Verify all sample IDs before reporting results. Review all data plots and results, including
exported results prior to reporting results.

Summary of Contents for Navios











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Navios

Reviews:

Beckman Coulter Navios, Instructions For Use Manual, Page: 191 / 586

Search results

Summary of Contents for Navios

Reviews: