Beckman Coulter Navios, Instructions For Use Manual

Page: 247 / 586

773232AH
10-51
Using Navios Software
File Menu
10
Dot Plot Coloring Mode
This alternates Color Dot plot mode between Color Blend and Color Precedence modes:
•
Color Blend Mode
•
Color Precedence Mode (default)
AutoGating Sensitivity
Select the sensitivity of the AutoGate region drawn.
Elliptical Sensitivity
Settings are 0.11, 0.33 and 1.1 (% of processed peak). Selecting 0.11 creates a larger region, whereas
selecting 1.1 creates a smaller radius region around the target population.
Contour Sensitivity
Settings are 1, 2, 3, 4, and 5. Level 1 = 0.11% processed peak at a resolution of 64x64, levels 2, 3 and
4 are 0.11, 0.33 and 1.1% at a resolution of 128x128. Level 5 is 1.1% processed peak at a resolution of
256x256.
Contour Travel
Input a maximum value the contour AutoGate region travels from the mean. The Minimum value is
25; Maximum is 250 channels. Use this option to slightly adjust the AutoGate from tube to tube if
slight changes in lysis cause the target population to move slightly. This option is not available for
elliptical AutoGates.
AutoGating Failure
You can select an error option when the AutoGate algorithm fails during acquisition in the MCL
automatic mode.
Pause on Error
The system pauses the current acquisition when an AutoGating error occurs and awaits further
input before proceeding.
Abort On Error
The system automatically aborts the Worklist when an AutoGating error occurs.
Ignore Errors
The system continues processing the Worklist when an AutoGating error occurs.