Beckman Coulter Navios Instructions For Use Manual Download Page 269

Page: 269 / 586

773232AH

10-73

Using Navios Software

Insert Menu

FlowPAGE Statistics Table

This option is used to insert statistics into FlowPAGE.

Insert > FlowPAGE Statistics Table

From the list of plots currently open in Navios software,

the one containing the statistics

you wish to insert.

or press

(

Esc

)

to exit the dialog box without accepting the changes.

The statistics for the selected plot are inserted into the FlowPAGE and can then be moved to the
desired position.

Only one plot is permitted per statistics table.

FlowPAGE LMD Compensation Grid

The LMD Compensation Grid shows the compensation settings used to generate the data seen on
screen and in plots on the FlowPAGE.

FlowPAGE Textbox

This option is used to insert text into FlowPAGE.

Summary of Contents for Navios











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Navios

Reviews:

Beckman Coulter Navios, Instructions For Use Manual, Page: 269 / 586

Search results

Summary of Contents for Navios

Reviews: