Beckman Coulter Navios, Instructions For Use Manual

Page: 465 / 586

773232AH
12-19
Replace/Adjust Procedures
Replace The Sheath Fluid Filter
12
3
Undo the flexible strap holding the sheath fluid filter.
4
Pick up the old sheath fluid filter, and notice how the three tubes are connected (1), (2) and (3)
and notice the direction of the arrow on it.
5
Get the new filter and hold it with the arrow going in the same direction as the arrow on the old
filter.
NOTE
In the next step, immediately install the new filter to avoid spills.
6
Disconnect and reconnect each tube to the new filter, one at a time, in this order: (1), (2) and (3).
Tubes (1), (2) are disconnected by pushing in on the metal clip on the connector (4).
When reconnected, the connectors snap into place.
7
Discard the old sheath fluid filter.
8
Wipe up any spills, and then put the filter in the bracket.
a.
Ensure that the arrow is pointing down.
b.
Reattach the flexible strap that holds the sheath fluid filter.
c.
Check that the tubing is not kinked or twisted.