Beckman Coulter Navios, Instructions For Use Manual

Page: 396 / 586

773232AH
10-200
Using Navios Software
Panel Report
1 Date and time report was printed
2 Sample identification (obtained from Navios listmode file)
3 Indicates the name of the panel used (obtained from Navios listmode file)
4 Navios software version and application plug in software version, if installed (obtained from system
registry)
5 Institution’s name and address where report was produced
6 Patient information (entered on Database Information screen; see Entering/Editing Database
Information )
7 User who logged on to Navios and generated the report
8 Tube ID (barcode)
9 Hematology information (entered on Database Information screen; see Entering/Editing Database
Information )
10 Optional statistics: X or Y mean, X or Y mode, X or Y median, X or Y CV, X or Y HPCV
11 Cell count results (may come from Navios listmode file or can be calculated by the Report Generator
depending on the template selected) and expected range of cell count (for expected ranges
entered at Local Tab in report template; see
Editing Panel Report Templates ). If a non-Flow-Count
fluorospheres template is used and hematology information is added, Cells/ μ L are reflected as
Cells/ μ L HEM
.
12 Percent positive results (obtained from Navios listmode file) and expected range of percent (entered
at Local Tab in report template; see
Editing Panel Report Templates )
13 Signature blank for your lab’s use
14 Comments (entered by user at the template or at individual report)
15 Reported results (measured or calculated)
16 Indicates that an equation was used and that results were generated by Report Generator
17 Specimen information (entered on Database Information screen; see Entering/Editing Database
Information )
18 Patient information (entered on Database Information screen; see Entering/Editing Database
Information )
19 Date and time sample was collected and date and time of sample analysis (obtained from Navios
listmode file)
20 Listmode filenames (obtained from Navios listmode file)
21 Indicates if the complete panel (for example, all tubes) was processed (obtained from Navios
listmode file)
Y
= yes
N
= no (Rerun entire panel if
N
appears.)
Incomplete Report
prints on the report.
22 Indicates if protocols or regions in the file match the template definition (obtained from Navios
listmode file)
Y
= yes
N
= no (Indicates that the protocol used different regions than the template. Rerun data/sample
through original protocol.)