Beckman Coulter Navios Instructions For Use Manual Download Page 392

Page: 392 / 586

773232AH

10-196

Using Navios Software

Editing Panel Report Templates

•

enable/disable the auto-print feature (when enabled, the report prints automatically at the end
of acquisition)

NOTE

The panel report auto-print feature is in addition to FlowPAGEs, plots and/or statistics that auto-

print per the Workspace Preferences setup (see Workspace Preferences, Acq Options tab).

•

add a global report comment (which is printed on every report generated from the affected
template)

•

edit flagging limit ranges

•

add or delete plots

NOTE

When you create or edit an export panel and then save it using the "Save As Panel" option, you must

clear the worklist and re-select the panel before running the export panel.

View the templates (with .cpf extension):

File

Open

Navigate to the desired panel folder.

To view the contents of a template, select the desired .cpf and

Open

NOTE

Any export panel created by a user must have the corresponding Panel Report Template created

by that user.

Summary of Contents for Navios











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Navios

Reviews:

Related manuals for Navios

Brands by name

Popular brands

Beckman Coulter Navios, Instructions For Use Manual

Search results

Summary of Contents for Navios

Reviews:

Related manuals for Navios

Brands by name

Popular brands