Guide to Rapid Configuration
5
Network Setup
The Network Setup allows configuring your ID-NET™ Network through the Master using GeniusPlus.
Three different procedures are available to define the number of network slave scanners, their label and address
according to two main conditions:
Condition
Available Procedure
Feature
Unknown Slave Addresses
Net-Autoset
automatically assigns random addresses to
slave or Stand Alone scanners.
Known Slave Addresses
Network Wizard
customizes the network (slave label and
address definition and physical identification of
a specific slave within network), updates
configuration to a file and makes it ready to
be sent to the Master.
Express Network Setup
automatically performs all the operations of
the Network Wizard apart from the physical
identification of a specific slave scanner.
NOTE
Any updates or changes to the ID-NET™ Master configuration cause the entire network to be reset.
Therefore it is advised to use an ID-NET™ Controller for applications which require frequent reading
device configuration (i.e. In-Line Code Verifier applications).
1.
The first operation
to perform is the configuration of your
scanner as "Master"
from the Local Device
Network Settings item in the Device Menu, see figure below:
