TCNM-AD/EX/SP Family Software Configuration Parameter Guide
40
Termination String
Terminators (up to 128 bytes) can be defined and transmitted as a block following the barcode(s).
Selections:
characters from
NUL
(00H) to
~
(7EH).
Data Packet Separators
The Data Packet Separators (up to 128 bytes) are used to separate multiple Data Packets (barcodes with their relative
reading information) in a single reading phase. For this reason, they are useful only when the Code Combination
parameter is not Single Label.
Selections:
characters from
NUL
(00H) to
~
(7EH).
Info Field Separators
The Info Field Separators (up to 128 bytes) are used to separate the Info Field from the Code Field within the Data
Packet of an output message. The Info Field contains the Quality Counters.
Selections:
characters from
NUL
(00H) to
~
(7EH).
Code Field Separators
The Code Field Separators (up to 128 bytes) are used to separate each of the code reading information fields before
the Code Field within the Data Packet.
Selections:
characters from
NUL
(00H) to
~
(7EH).
Code Field Length Setting
The code field length (in number of characters/digits) can be specified in order to be transmitted:
Selections:
Variable
all possible code field lengths (in number of characters/digits) allowed for the code selected are
accepted.
Fixed
only the length defined by the Code Field Length parameter is accepted.
Code Field Length
This parameter is only available when the Code Field Length Setting is set to
Fixed
.
It defines (in number of characters/digits) the length of the code field to be transmitted:
Selections:
a value in the range from
0
to
48
(in number of characters/ digits)
Data Justification
This parameter is only available when the Code Field Length Setting is set to
Fixed
.
It defines the position of the Fill Character within the code:
Selections:
Left
the Fill Character is left aligned and precedes the code field
Right
the Fill Character is right aligned and follows the code field
Fill Character
This parameter is only available when the Code Field Length Setting is set to
Fixed
.
The Fill Character is inserted into each character position of a code field that has more characters (as defined in the
Code Field Length) than exist in the barcode read. If the field is left blank, the space character is sent.
Selections:
a character from
NUL
(00H) to
~
(7EH)
Example
For barcode "12345" with Fill Character "-" (2DH) and Code Field Length of
10
characters, the result of the different
alignment will be:
Left
aligned = ...<Code Identifier><12345----->...
Right
aligned = ...<Code Identifier><-----12345>...
