Altigen MAX Communication Server ACC 6.5, Administration Manual

Page: 430 / 488

Chapter 30: Tools and Applications
416
MAXCS ACC 6.5 Administration Manual
•
PMC chip from host and DSP if T1/E1 board
You have the option of testing a single board or testing all boards at the same time.
CT-Bus Test Tool
The CT-Bus Test Tool is a tool that detects one-way connection, cross talk, bad MVIP
cable and static noise problems.
To run the CT-Bus Test Tool:
1. Stop AltiGen Switching Services before running this utility.
2. Launch CT-Bus Test Tool from
Start > All Programs > MAX Communication
Server ACC/ACM > Gateway Tools > CT-Bus Test Tool .
3. Click Start to begin the test.
4. At the end of the test, the utility provides pass or fail results.
Backup and Restore Utility
Note:
The configuration backup option is turned on by default.
To back up or restore data, select either
•
From MaxAdmin: Services > Utilities > System Data Management , or
•
From the Windows Start menu : All Programs > MAX Communication Server
ACC/ACM > Utilities > ACC/ACM Backup and Restore.
Figure 1. System Data Management window
Note:
The System Data Management window can only be accessed at the primary
MAXCS system; it is
not available from a remote MaxAdmin client.