Altigen MAX Communication Server ACC 6.5, Administration Manual

Page: 218 / 488

Chapter 15: Extension Configuration
204
MAXCS ACC 6.5 Administration Manual
IP Extension Configuration
See “Setting Up IP Extensions” on page 227 for information on configuring this section
of the Extension Configuration
General tab.
Phone Display Options
For analog and IP phones, the administrator can select what information is to be
displayed.
Depending on the number of display lines on the LCD, the phone can be set up to show
two lines of specific caller information on the display.
In the
Phone Display field, use the Number Line and Name Line drop-down lists to
select the caller information to display:
•
Caller Number
•
Caller Name
•
DNIS Number
•
DNIS Name
•
IVR Data
•
User Data
Note:
For most phones, the number line can only display a number. If the Number Line
is set to Caller Name , DNIS Name , User Data or AA Data , the phone may
display “Unknown” on the number line.
Alti-IP 600 and IP 705 Phone Display Notes
For the Alti-IP 600 and IP 705, the Name Line displays caller information under the
following conditions:
•
If Name Line is set to Caller Name , it will display caller name. If there is no name
information, the number will be displayed.
•
If Name Line is set to Caller Number , it will display the caller number. If there is
no number information, “Unknown” will be displayed.
•
If Name Line is set to DNIS Name , it will display DNIS name. If there is no name
information, the DNIS number will be displayed.
•
If Name Line is set to DNIS Number , it will display the DNIS number. If there is
no number information, “Unknown” will be displayed.
Transmit to phone
(dB Gain) Range -3 ~ +3db
You can decrease or increase the extension phone's
receiving volume with this setting. The volume will
be lower or higher for the extension user. Default is
0 dB.
Parameter Description