Commands in DSR Application Subsystems
:SGENeral:GLOBal:TRIGger Subsystem
178
Agilent 81250 Parallel Bit Error Ratio Tester, Programming Reference, March 2006
N O T E
The commands :RCL:DET and :CLOC:MEAS cannot be executed when
the system is in the running state.
Example
:_test:SGEN:GLOB:TRIG:CLOC:MEAS
:<Handle>:SGENeral:GLOBal:TRIGger[:
SEQuence][:LAYer]:TVOLtage
Syntax
:<Handle>:SGENeral:GLOBal:TRIGger[:SEQuence][:LAYer]:TVOLtage
<TermVoltage>
Parameters
<TermVoltage>
Specifies the termination voltage of the clock/ref
input. The available termination voltage range is –2.10 V to +3.30 V.
Default is 0 V.
Example
:_test:SGEN:GLOB:TRIG:TVOL 1
:<Handle>:SGENeral:GLOBal:TRIGger[:
SEQuence][:LAYer]:TVOLtage?
Syntax
:<Handle>:SGENeral:GLOBal:TRIGger[:SEQuence][:LAYer]:TVOLtage?
Return Value
Returns the actual setting of the termination voltage of the clock/ref
input.
Example
:_test:SGEN:GLOB:TRIG:TVOL?
might return:
1.000
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com