Agilent Technologies 4294A, Operating Manual

Page: 372 / 469

364 Appendix B
Key Definitions
Softkeys displayed by pressing the [Meas] key
Table B-9 Measurement parameter (Measurement) menu (3/3)
Key operation: [Meas] - more 1/3 - more 2/3
Softkey Function GPIB command
COMPLEX Z-Y
| Selects complex impedance (Z) and complex admittance (Y) as measurement
parameters. If these parameters are selected, the graph is displayed in the
complex plane or polar coordinates (selected using Table B-12, “Format
(Format) menu (2),” on page 365). MEAS COMP
|Z| - Ls
| Selects impedance absolute value and series inductance as measurement
parameters. MEAS IMLS
|Z| - Cs
| Selects impedance absolute value and series capacitance as measurement
parameters. MEAS IMCS
|Z| - Lp
| Selects impedance absolute value and parallel inductance as measurement
parameters. MEAS IMLP
|Z| - Cp
| Selects impedance absolute value and parallel capacitance as measurement
parameters. MEAS IMCP
other Displays Table B-10, “Measurement parameter (Measurement) menu (other),”
on page 364. (N/A)
more 3/3 Displays Table B-7, “Measurement parameter (Measurement) menu (1/3),” on
page 363. (N/A)
Table B-10 Measurement parameter (Measurement) menu (other)
Key operation: [Meas] - more 1/3 - more 2/3 - other
Softkey Function GPIB command
|Z| - Rs
| Selects impedance absolute value and series resistance as measurement
parameters. MEAS IMRS
|Z| - Q
| Selects impedance absolute value and Q factor (quality factor) as measurement
parameters. MEAS IMQ
|Z| - D
| Selects impedance absolute value and dissipation factor as measurement
parameters. MEAS IMD
Lp - Rp
| Selects parallel inductance and parallel resistance as measurement parameters. MEAS LPR
Cp - Rp Selects parallel capacitance and parallel resistance as measurement parameters. MEAS CPR
return Returns to Table B-7, “Measurement parameter (Measurement) menu (1/3),” on
page 363. (N/A)