Agilent Technologies 4294A, Operating Manual

Page: 325 / 469

Chapter 9 317
Setting/Using Control and Management Functions
Setting/Checking the LAN
9.
Se
ttin
g/Us
in
g Co
ntr
ol and
Man
age
men
t F
unc
tions
Setting/Checking the Subnet Mask
Follow these steps to set or check the subnet mask. The subnet mask is delimited into four
parts by periods; each part is independently set.
Step 1. Press the
[Local]
key to display the Local menu.
Step 2. Press the
SUBNET MASK
key to display the Subnet Mask Setting menu.
Step 3. Press the
1st
key. In the set parameter value field in the upper left area of the screen, the 1st
part of the subnet mask (current set value) is displayed. Below it, the entire currently set
subnet mask is displayed in a smaller size.
Step 4. Use the keys or rotary knob of the ENTRY block in one of the following ways to specify
the 1st part of the subnet mask.
• Enter the desired value with the numeric keys (
[0]
to
[9]
) and then press the
[ ´ 1]
unit
key.
• Turn the rotary knob (
m m m m
) until the desired value is set.
• Press the step keys ([
­
][
¯
]) to set the desired value.
The 1st part of the subnet mask can be set to an integer ranging from 0 through 255.
Step 5. Press the
2nd
key. In the set parameter value field in the upper left area of the screen, the
2nd part of the subnet mask (current set value) is displayed. Below it, the entire currently
set subnet mask is displayed in a smaller size.
Step 6. Use the keys or rotary knob of the ENTRY block in one of the following ways to specify
the 2nd part of the subnet mask.
• Enter the desired value with the numeric keys (
[0]
to
[9]
) and then press the
[ ´ 1]
unit
key.
• Turn the rotary knob (
m m m m
) until the desired value is set.
• Press the step keys ([
­
][
¯
]) to set the desired value.
The 2nd part of the subnet mask can be set to an integer ranging from 0 through 255.
Step 7. Press the
3rd
key. In the set parameter value field in the upper left area of the screen, the
3rd part of the subnet mask (current set value) is displayed. Below it, the entire currently
set subnet mask is displayed in a smaller size.
Step 8. Use the keys or rotary knob of the ENTRY block in one of the following ways to specify
the 3rd part of the subnet mask.
• Enter the desired value with the numeric keys (
[0]
to
[9]
) and then press the
[ ´ 1]
unit
key.
• Turn the rotary knob (
m m m m
) until the desired value is set.
• Press the step keys ([
­
][
¯
]) to set the desired value.
The 3rd part of the subnet mask can be set to an integer ranging from 0 through 255.
Step 9. Press the
4th
key. In the set parameter value field in the upper left area of the screen, the
4th part of the subnet mask (current set value) is displayed. Below it, the entire currently
set subnet mask is displayed in a smaller size.