Agilent Technologies 4294A, Operating Manual

Page: 243 / 469

Chapter 8 235
Analysis and Processing of Result
Automatically performing search for each sweep (search tracking)
8. A
nal
ys
is
a
nd P
roc
es
si
ng
of
Res
ult
Automatically performing search for each sweep (search
tracking)
In the preset setting, the maximum value/minimum value search, target value search, or
peak search function is executed only once when the corresponding key (MAX key, MIN
key, and so on) is pressed. On the other hand, you can set the search on the trace to perform
automatically at the completion of each sweep (search tracking function).
Step 1. Activate the trace for which you want to execute search tracking (to which the setting is
applied).
Step 2. Press the
[Search]
key to display the Search menu.
Step 3. Press the
SEARCH TRK
on
OFF
key to turn on the search tracking function (pressing the
key toggles your selection).
Step 4. Select the search function you want to perform in the search tracking.
For details about each search function, refer to:
• “Search the maximum/minimum measurements” on page 223
• “Search the point of target measurement” on page 225
• “Search the maximum/minimum peak” on page 228 and “Define the Peak” on page
232
Active Trace Key operation
Trace A
[A]
Trace B
[B]
Softkey label Search tracking function
SEARCH TRK ON off On (search is executed when you press a
search execution key; it is also executed
automatically each time a single sweep is
completed)
SEARCH TRK on OFF Off (search is executed only when you press a
search execution key)
Search function Key operation
Maximum value search
MAX
Minimum value search
MIN
Target value search
TARGET
Peak search PEAK