Agilent Technologies 4294A, Operating Manual

Page: 105 / 469

Chapter 5 97
Setting Measurement Conditions
Setting Number of Points (NOP)
5
. S
etti
ng M
eas
ur
em
ent
Cond
iti
on
s
Setting Number of Points (NOP)
Step 1. Press
[Sweep]
to display the sweep menu.
Step 2. Press the
NUMBER OF POINTS
key. This will display the current setting for number of
points in the parameter settings area in the upper-left part of the screen.
Step 3. Use keys or the rotary knob in the ENTRY block in one of the following ways to specify a
value for the number of points.
• Enter the desired value with the numeric keys (
[0]
to
[9]
) and then press the
[ ´ 1]
key.
• Turn the rotary knob (
m m m m
) until the desired value is set.
• Press the step keys ([ ­ ][ ¯ ]) to set the desired value.
NOTE The number of sweep points can be set to any integer from 2 to 801.
When list is selected as a sweep type (list sweep), use a list sweep table to set the number
of points.
Setting the number of points is applied commonly to traces A and B.
Figure 5-12 Number of points: 51