Agilent Technologies 4294A, Operating Manual

Page: 366 / 469

358 A
Manual Changes
Change to the revision 1.0x
Miscellaneous Changes
The option system of the 4294A has changed since February 2003. Apply the following
changes.
Table A-3
New Option Number Old Option Number Remark
800 (Standard Frequency
Reference) Standard
1
same as the right number 1D5 (High Stability Frequency
Reference)
810 (Add Mini DIN Keyboard) -
2
- 1A2 (Delete Mini DIN Keyboard)
same as the right number 1CN (Handle Kit)
same as the right number 1CM (Rack Mount Kit)
same as the right number 1CP (Rack Mount & Handle Kit)
ABA (Add Operation Manual set
(English)) -
3
- ABA (Add Operation Manual set
(English))
ABJ (Add Operation Manual set
(Japanese)) -
3
- ABJ (Add Operation Manual set
(Japanese))
same as the right number 0BW (Add Service Manual)
- 0B1 (Delete Manual Sets)
4
- 0B1 (Add Manual Sets)
1.In the previous system, an option for the frequency reference was available only for the high stability
frequency reference. In the new option system, it is available for the high stability and standard references,
requiring the customer to select either of them.
2.In the previous option system, the keyboard comes as one of standard accessories. In the new option system,
it will be attached only when you choose option 810.
3.In the previous system, the option number is used to choose the language of the operation manual set (standard
accessory). In the new option system, it is used to add an operation manual set (optional accessory) of the
language the customer desires.
4.No selection of addition/deletion is required for the operation manual set because it is only available as an op-
tional accessory in the new option system. When 2 or more sets are required, specify option ABA,ABJ * (num-
ber of required sets).