ABB Relion 670 Series RES670, Technical Manual

Page: 692 / 888

The MULTICMDRCV function block has 16 binary outputs, all controlled through the
command block of one or many MULTICMDSND function blocks. There are 60
instances of the MULTICMDRCV where the first 12 are fast (8 ms), and the others are
slow (100 ms). Additionally, the MULTICMDRCV has a supervision function, which
sets the output connector "VALID" to 0 (zero) if its block does not receive any data within
the time defined by tMaxCycleTime.
LON connections are established using LON network tool (LNT).
18.14 Security events on protocols SECALARM
18.14.1 Security alarm SECALARM
18.14.1.1 Signals
Table 568: SECALARM Output signals
Name Type Description
EVENTID INTEGER EventId of the generated security event
SEQNUMBER INTEGER Sequence number of the generated security event
18.14.1.2 Settings
Table 569: SECALARM Non group settings (basic)
Name Values (Range) Unit Step Default Description
Operation Disabled
Enabled
- - Enabled Operation On/Off
18.15 Activity logging parameters ACTIVLOG
18.15.1 Activity logging ACTIVLOG
ACTIVLOG contains all settings for activity logging.
There can be 6 external log servers to send syslog events to. Each server can be configured
with IP address; IP port number and protocol format. The format can be either syslog
(RFC 5424) or Common Event Format (CEF) from ArcSight.
Section 18
1MRK 511 365-UUS A
Station communication
686 Phasor measurement unit RES670 2.1 ANSI
Technical manual