ABB Relion 670 Series RES670, Technical Manual

Page: 679 / 888

18.7.15.2 Communication ports
The serial communication module (SLM) is used for SPA/IEC 60870-5-103/DNP and
LON communication. This module is a mezzanine module, and can be placed on the
Analog/Digital conversion module (ADM). The serial communication module can have
connectors for two plastic fibre cables (snap-in) or two glass fibre cables (ST, bayonet) or
a combination of plastic and glass fibre. Three different types are available depending on
type of fibre.
The incoming optical fibre is connected to the RX receiver input, and the outgoing optical
fibre to the TX transmitter output. When the fibre optic cables are laid out, pay special
attention to the instructions concerning the handling and connection of the optical fibres.
The module is identified with a number on the label on the module.
18.8 Goose binary receive GOOSEBINRCV
18.8.1 Function block
GOOSEBINRCV
BLOCK ^OUT1
DVALID1
^OUT2
DVALID2
^OUT3
DVALID3
^OUT4
DVALID4
^OUT5
DVALID5
^OUT6
DVALID6
^OUT7
DVALID7
^OUT8
DVALID8
^OUT9
DVALID9
^OUT10
DVALID10
^OUT11
DVALID11
^OUT12
DVALID12
^OUT13
DVALID13
^OUT14
DVALID14
^OUT15
DVALID15
^OUT16
DVALID16
COMMVALID
TEST
IEC07000047.vsd
IEC07000047 V3 EN
Figure 256: GOOSEBINRCV function block
1MRK 511 365-UUS A
Section 18
Station communication
Phasor measurement unit RES670 2.1 ANSI 673
Technical manual