ABB Relion 670 Series RES670, Technical Manual

Page: 823 / 888

To reach the rear side of the IED, a free space of 3.2 inches is required on the unhinged
side.
3.2"
View from above
1
ANSI_en06000135.vsd
3
2
(80 mm)
ANSI06000135 V1 EN
Figure 321: How to reach the connectors on the rear side of the IED.
PosNo Description Type
1 Screw M4x10
2 Screw M5x8
3 Rear protection cover (Ordered separately)
21.4.4 Side-by-side 19” rack mounting
21.4.4.1 Overview
IED case size 1/2 x 19” or 3/4 x 19” and RHGS cases can be mounted side-by-side up to
a maximum size of 19”. For side-by-side rack mounting, the side-by-side mounting kit
together with the 19” rack panel mounting kit must be used. The mounting kit has to be
ordered separately.
When mounting the plates and the angles on the IED, use screws that
follow the recommended dimensions. Using screws with other
dimensions may damage the PCBs inside the IED.
1MRK 511 365-UUS A
Section 21
IED hardware
Phasor measurement unit RES670 2.1 ANSI 817
Technical manual