ABB Relion 670 Series RES670, Technical Manual

Page: 661 / 888

18.7.10 Function commands for IEC 60870-5-103 I103CMD
18.7.10.1 Functionality
I103CMD is a command function block in control direction with pre-defined output
signals. The signals are in steady state, not pulsed, and stored in the IED in case of restart.
18.7.10.2 Identification
Function description Function block
name
IEC 60617
identification
ANSI/IEEE C37.2
device number
Function commands for IEC
60870-5-103
I103CMD - -
18.7.10.3 Function block
IEC10000282-1-en.vsd
I103CMD
BLOCK 16-AR
17-DIFF
18-PROT
IEC10000282 V1 EN
Figure 251: I103CMD function block
18.7.10.4 Signals
Table 523: I103CMD Input signals
Name Type Default Description
BLOCK BOOLEAN 0 Block of commands
Table 524: I103CMD Output signals
Name Type Description
16-AR BOOLEAN Information number 16 disable/enable autorecloser
17-DIFF BOOLEAN Information number 17, block of differential protection
18-PROT BOOLEAN Information number 18, block of protection
18.7.10.5 Settings
Table 525: I103CMD Non group settings (basic)
Name Values (Range) Unit Step Default Description
FunctionType 1 - 255 - 1 1 Function type (1-255)
1MRK 511 365-UUS A
Section 18
Station communication
Phasor measurement unit RES670 2.1 ANSI 655
Technical manual