ABB Relion 670 Series RES670, Technical Manual

Page: 550 / 888

• NoEvents
• OnSet
• OnReset
• OnChange
• AutoDetect
It is possible to define which part of EVENT function generates the events. This can be
performed individually for the
SPAChannelMask and LONChannelMask respectively.
For each communication type these settings are available:
• Disabled
• Channel 1-8
• Channel 9-16
• Channel 1-16
For LON communication the events normally are sent to station level at change. It is
possibly also to set a time for cyclic sending of the events individually for each input
channel.
To protect the SA system from signals with a high change rate that can easily saturate the
event system or the communication subsystems behind it, a quota limiter is implemented.
If an input creates events at a rate that completely consume the granted quota then further
events from the channel will be blocked. This block will be removed when the input calms
down and the accumulated quota reach 66% of the maximum burst quota. The maximum
burst quota per input channel is 45 events per second.
16.6 Disturbance report DRPRDRE
16.6.1 Identification
Function description IEC 61850 identification IEC 60617
identification
ANSI/IEEE C37.2
device number
Disturbance report DRPRDRE - -
Disturbance report A1RADR - A4RADR - -
Disturbance report B1RBDR - B8RBDR - -
Section 16
1MRK 511 365-UUS A
Monitoring
544 Phasor measurement unit RES670 2.1 ANSI
Technical manual