ABB Relion 670 Series RES670, Technical Manual

Page: 472 / 888

Table 357: IB16 Output signals
Name Type Description
OUT1 BOOLEAN Output 1
OUT2 BOOLEAN Output 2
OUT3 BOOLEAN Output 3
OUT4 BOOLEAN Output 4
OUT5 BOOLEAN Output 5
OUT6 BOOLEAN Output 6
OUT7 BOOLEAN Output 7
OUT8 BOOLEAN Output 8
OUT9 BOOLEAN Output 9
OUT10 BOOLEAN Output 10
OUT11 BOOLEAN Output 11
OUT12 BOOLEAN Output 12
OUT13 BOOLEAN Output 13
OUT14 BOOLEAN Output 14
OUT15 BOOLEAN Output 15
OUT16 BOOLEAN Output 16
15.12.5 Setting parameters
The function does not have any parameters available in local HMI or Protection and
Control IED Manager (PCM600)
15.12.6 Operation principle
With integer 15 on the input INP the OUT1 = OUT2 = OUT3= OUT4 =1 and the
remaining OUTx = 0 for (5≤x≤16).
OUTx represents a value when activated. The value of each of the OUTx is in accordance
with the table IB16_1. When not activated the OUTx has the value 0.
In the above example when integer 15 is on the input INP the OUT1 has a value =1, OUT2
has a value =2, OUT3 has a value =4 and OUT4 has a value =8. The sum of these OUTx
is equal to 1 + 2 + 4 + 8 = 15.
This follows the general formulae: The sum of the values of all OUTx = 2
x-1
where
1≤x≤16 will be equal to the integer value on the input INP.
Section 15
1MRK 511 365-UUS A
Logic
466 Phasor measurement unit RES670 2.1 ANSI
Technical manual