Zontes ZT310T-M, Руководство по обслуживанию

Страница: 75 / 184

75
/
184
e. Open the air filter slightly, and adjust the left rear
shock to the same gear with reference to the adjustment
of the right rear shock absorption method.
3. Replace the shock absorption
a. After removing the muffler assembly, follow the
steps “a” to “d” in the previous "Remove spark plug" to
remove the side covers; follow the steps a to j in the
throttle valve body to remove the stepper motor and
clean up carbon deposits to remove the rear storage
box. After disassembly, it is as shown in the figure
below.
b. Remove 2 pieces of M6 decorative buckles
⑴
and
5 pieces of M8 decorative buckles
⑵
. Remove the 2
expansion nails (3).
c. Use 4# inner hexagon to remove 2 bolts
⑷
; after
grasping the rear armrest, use 12# sleeve to remove 5
bolts
⑸
, and then take off the rear armrest assembly.
d. Remove the bolt
⑹
at the front of the left tail skirt
with a 5# inner hexagon, and remove the bush
⑺
and
cushion rubber
⑻
. Remove the 2 expansion(3) nails at
the bottom.
Grasp the left tail skirt and remove the expansion nail
(3), and take off the left tail skirt.
Remove the right tail skirt in the same way.
e. Pull down the front part of the rear mud plate, fix
the nut
⑼
with a 14# sleeve or a torx wrench, loosen
the bolt
⑻
completely with a 14# sleeve on the outside,
and remove the nut
⑼
. Be careful not to remove the
bolt
⑻
first. Remove the nut
⑻
by the same operation
on the other side. One person supports the rear wheel
assembly, and one person removes the bolts
⑻
on
both sides; lower the rear wheel assembly to the ground.
Nut
⑼
torque standard: 30N.m (3.1 kgf.m, 22 lbf.ft).
f. Grasp the rear right shock absorber and use a 12#
sleeve to remove the bolt
⑽
, and remove the rear right
shock absorber. On the left side, pull the air filter out to
expose the bolt head and then remove the bolt
⑽
.
Standard torque: 24N.m (2.4 kgf.m, 18 lbf.ft).