Zontes ZT310T-M, Руководство по обслуживанию

Страница: 139 / 184

139
/
184
c. First remove the 3 pieces of wire clamp
⑷
, and
then pull out the wheel speed sensor
⑵
and the RC-
HU hose from the 4 pieces of oil pipe clamp
⑶
. If you
need to remove the tubing clamp (3), you can use 4#
inner hexagon to remove the bolts and then you can
take it off.
d. Pull the RC-HU head out of the gap between the
auxiliary water tank and the frame.
e. Pull out the RC-HU hose and wheel speed sensor
wire from the rear inner mud plate.
f. Pull out the wheel speed sensor from the clamp
⑸
,
remove the bolt
⑹
with a 4# inner hexagon, and then
remove the wheel speed sensor from the car. If you
need to remove the clamp
⑸
, you can use 4# inner
hexagon to remove the bolt
⑹
that fixes the clamp.
g. Check whether the surface of the removed hose is
aging, cracked, damaged, abraded, etc. Wipe up the
remaining brake fluid with a non-woven cloth, and then
wrap the ends of the hose with cling film or a plastic bag
to prevent foreign matter from entering. Check whether
the cable sheath of the wheel speed sensor cable is
damaged. If the sheath is frayed, it can be glued with
electrical tape to prevent short-circuit.