Zontes ZT310T-M, Руководство по обслуживанию

Страница: 80 / 184

80
/
184
j. Wipe off the oil and residual sealant on the joint
surface of the cylinder head and the seal ring of the
cylinder head with a clean rag, and reapply a proper
amount of sealing silicone on the corners of the joint
surface of the cylinder head. Then install the cylinder
head cover assembly corresponding to the shape of the
joint surface. Use 8#T-shaped socket wrench (or wind
batch) to lock the cylinder head cover 6 M6×30 hexagon
flange bolts, the torque value is 10±2N.m(1±0.2
kgf.m,7.4±1.5 lbf.ft) ).
k. Put the 13×2.8 O-ring on the M14×1.5 screw plug,
screw it into the corresponding screw hole of the right
crankcase cover, and tighten it with a 5# Allen key. The
torque value is 10±2N.m(1±0.2 kgf.m, 7.4±1.5 lbf.ft);
After putting the 27.4×2.65 O-ring on the M30×1.5
aluminum screw plug, screw it into the corresponding
screw hole of the right crankcase cover, tighten it with a
10# Allen key, the torque value is 16±2N.m (1.6±0.2
kgf.m, 12±1.5 lbf.ft).
l. So far, the adjustment operation of the valve
clearance is completed.