Zontes ZT310T-M, Руководство по обслуживанию

Страница: 120 / 184

120
/
184
c. Press the anti-trip buckle of the plug of the oil level
sensor and pull out the plug.
d. Remove the oil pump plug in the same way. Pinch
the snorkel clamp and move it down, and pull out the
snorkel. Press the anti-release buckle of the high-
pressure oil pipe at the end of the oil pump, and pull the
high-pressure oil pipe along the axis of the oil outlet of
the oil pump.
e. Use needle-nose pliers to slightly clamp the cable
tie and push it up to remove it from the bracket.
f. Use a 10# sleeve to remove the 4 bolts (1) that fix
the fuel tank.
g. After confirming that the high-pressure oil pipe,
vent pipe and oil level sensor plug have been
unplugged, stand on the right side of the vehicle to
facilitate the removal of the fuel tank assembly. Hold up
the fuel tank assembly and turn it clockwise (as shown
in Figure 1), while turning, let the seam welding on the
right side of the fuel tank go down to the bottom of the
bracket (as shown in Figure 2). Turn clockwise about 90
degrees and turn the fuel tank assembly forward (as
shown in Figure 3). After adjusting the position
continuously, remove the fuel tank assembly (see
Figure 4). Because it is difficult to describe the process
in detail, it takes many patience to try.