Zontes ZT310T-M, Руководство по обслуживанию

Страница: 35 / 184

35 / 184
●The air filter element and the engine air inlet ele ment
should be cleaned regularly in accordance with the
provisions of the regular maintenance and lubrication
table.
●If you often ride in humid or dusty areas, you should
check the air filter element more frequently. Be sure to
inspect the waste oil pipe of the air filter frequently.
●If the filter element is damaged, it must be replaced,
otherwise the dirt will be directed into the engine and
cause damage to the engine.
●Ensure that the filter element is assembled in place.
●If the air filter is clogged with dust, the air intake
resistance will increase and the output power will
decrease.
●If the filter element of the engine air intake is blocked
by dust, the air intake resistance will increase, which will
reduce the heat dissipation of the belt and affect the life
of the belt.
●If the replacement period is not reached, the surface of
the filter element is clean without damage, you can use
a dust blow gun to blow air from the clean side of the
filter element to blow away the dust on the surface of the
filter element.
●Do not let water enter the air filter when washing the
vehicle.
Bolts and nuts of muffler
1. Check for air leaks at the engine exhaust.
The old models:
The new models:
a. If there is a slight air leak, first try to tighten the
exhaust port nut with 6# inner hexagon; if the problem is
not solved, remove the muffler and replace with a new
engine exhaust port gasket.
b. If there is no sign of air leakage, use 6# inner
hexagon to check whether the M8 nut at the exhaust
port of the engine is loose.
2. Whether the 3 bolts connecting the muffler cavity of
the 14# sleeve inspection muffler and the rear rocker
arm are loose.
●Do not touch all metal surfaces of the muffler while the
engine is running or after riding to prevent burns.
●The vehicle must be parked on a flat and stable ground
or a lifting platform.
●If you need to replace the new exhaust port gasket,
you must wait for the muffler to cool down completely
before starting operation.
●Do not blast the throttle for a long time on the spot.
●Large load and long -term low-speed driving will
damage the engine and muffler.
●It is forbidden to use leaded gasoline to avoid the loss
of exhaust gas purification ability due to catalyst failure.
●If you need to remove the muffler for other operations,
it is recommended to cover the air inlet and outlet holes
of the muffler with textured paper to prevent foreign
objects from entering.
●Keep the drain hole at the bottom of the muffler
unblocked to prevent condensation water from
accumulating in the muffler cavity.
●Clean up the dirt, dirt and other stains on the surface of
the muffler in time.