Zontes ZT310T-M, Руководство по обслуживанию

Страница: 163 / 184

163
/
184
2. Remove the cover
a. Remove the decorative glue on the rear armrest,
use 4# inner hexagon to remove the 2 small arrow bolts
of 2 M6×12, remove the 2 expansion nails (green mark)
on the rear armrest, use 12# sleeve Remove the 5
M8×25 bolts pointed by the big arrow. Remove the rear
armrest.
b. After putting down the right rear pedal, use a 4#
inner hexagon to remove 1 M6×16 bolt
⑴
on the pedal,
remove the bushing
⑵
, cushion rubber
⑶
, then grasp
the end of the side cover with your hand, and press the
arrow Pull out in the direction (from back to front) until
the 5 mushrooms (in the green circle) on the side cover
are pulled out, and then take out the side cover.
c. Use 5# inner hexagon to remove the 2 non-
standard M6×16 bolts
⑷
on the tail skirt, remove the
bushing
⑵
, cushion rubber
⑶
, and then use 4# inner
hexagon to remove the 2 expansion nails under the tail
skirt (green circle Logo).
d. Use 4# inner hexagon to remove the 2 expansion
nails inside the tail skirt and next to the rear taillight
(marked by the green circle).
e. Press down the part where the front part of the tail
skirt is in contact with the right part of the fuel tank cover
(golden), and pull the right part (golden) of the fuel tank
cover with one hand until the front of the tail skirt is
pulled out; then hold the middle part of the fuel tank with
the other hand Press the cover (blue) down, grab the
front part of the tail skirt with one hand and pull up until
the front part of the tail skirt is separated from the middle
cover (blue) of the fuel tank; hold the rear part of the tail
skirt (green mark) with the last hand, Grab the front of
the tail skirt with one hand and take it out in the direction
of the arrow.
f. Refer to steps a-j in the steps of "Removing the
spark plug" to remove the left and right pedals and the
left and right trim cover components.
g. Pull down the connecting part of the surrounding
bottom plate and the middle of the surrounding (cyan)
with one hand, grasp the rear part of the surrounding
bottom (green mark) and pull it in the direction of the
arrow until the surrounding bottom is removed.