YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 507

Страница: 507 / 589

17-11

IM 701240-01E

App

Index

Troubleshooting, Maintenance, and Inspection

Code

Message and Corrective Action

Section

1313

FTP Error: AppendData

Chapter 15

Confirm the network settings, connection, and disk capacity.

1314

FTP Error: Client Handle

Chapter 15

Confirm the network settings and connection.

1315

FTP Error: Others

Chapter 15

Confirm the network settings and connection.

1335

Cannot send data to a network printer.

12.3, 15.4

Confirm the network settings and connection.

1336

Cannot send a mail.

15.5

Confirm the network settings and connection.

1345

Test Error.

Chapter 15

1346

Test Success.

Chapter 15

1348

Failed to initialize network.

Chapter 15

Confirm the network settings.

1349

The password entered the first time is different from the password entered the second time.

15.6

Reenter the password for the second time.

1350

Failed to acquire time from SNTP server.

15.8

Confirm the network settings and connection.

1501

To apply the changes, power-cycle the SL1400.

Chapter 15

1502

Executed the firmware overwriting of the frequency module.

17.4

1503

Overwriting firmware of the frequency module...

17.4

1505

Executed the firmware overwriting of the built-in printer.

17.4

1506

Overwriting the printer firmware...

–

1600

This function can be used only when the recorder mode is Off.

Chapter 9

1601

Can be specified only when the recorder mode is Off.

Chapter 9

1602

Can be configured only when the recorder mode is Off.

Chapter 9

Print from the Reprint menu.

1603

This function cannot be used when the recorder mode is set to X-Y.

9.6

1604

Cannot be configured or executed when the recorder mode is Off.

Chapter 9

1605

Repeat trigger cannot be specified.

Chapter 9

Repeat trigger is valid only during chart recorder mode when the print style is waveform and shot
recording is not OFF.

1606

Cannot be changed during X-Y recording.

–

1607

Cannot use wave window trigger when the recorder mode is set to chart or X-Y.

6.17

1608

Can not be specified when the print style is Numeric.

9.5

1611

Cannot be specified because characters in the JIS level-2 kanji set are included.

4.2

Create the file on the local drive, and then copy it to the network drive.

1612

Can not be specified in the current mode.

–

Other Errors (9999)

Code

Message and Corrective Action

Section

9999

This error No. is not defined.

–

Note

If servicing is required, initialize the instrument once for confirmation.

17.2 Messages and Corrective Actions

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды