YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 78

Страница: 78 / 589

2-47

IM 701240-01E

App

Index

Explanation of Functions

2.8

Communications

Command Communications (GP-IB, Serial (RS-232), USB, and Ethernet) «For
procedures, see the Communication Interface User’s Manual on the CD-ROM.»

The SL1400 comes standard with GP-IB, serial (RS-232), and USB interfaces. The

Ethernet interface is available as an option.

Through communication functions, you can output waveform data to a PC for data

analysis or control the SL1400 using an external controller to carry out waveform

measurements.

Communication

interface

SL1400

Saving/Loading Data to a Network Drive (FTP Client Function) «For procedures, see
chapter 15.»

Waveform data,

screen image data, and setup data can be saved, deleted, or copied

on an FTP server

on the network in the same way as the built-in PC card, internal hard

disk (option), or external SCSI device.

*1 The following types of waveform data cannot be loaded from a network drive.

• Waveform data that is 50 MB or more in size.
• Waveform data saved on the all waveform display (All) of the history memory function.

*2 PC or workstation on which the FTP server function is running.

Ethernet

FTP server

SL1400

Printing on a Network Printer «For procedures, see section 15.4.»

The screen image data can be printed on a network printer in the same way as the built-

in printer or USB printer.

Printer

Ethernet

SL1400

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды