YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 307

Страница: 307 / 589

10-3

IM 701240-01E

App

Index

Waveform Computation

Explanation

Addition, subtraction, multiplication, and division can be performed between channels.

Computation Target Channels

CH1 to CH16, Math1 to Math7

Computation range: Start Point/End Point

By default, the measurement range is

5 divisions of the display frame on the time axis.

You can limit this range.

The concept of the computation range is analogous to the concept of the selectable

range of cursor display position in cursor measurement.

For details, see “Selectable Range of Cursor Position” in section 11.4.

Scaling

Set the upper and lower limits of the math waveform display.

Auto:

The upper and lower limits are set according to the computed result.

Manual:

The upper and lower limits can be set arbitrarily. The selectable range is

–9.9999E+30 to 9.9999E+30.

Unit

Unit can be set arbitrarily using up to four characters. The specified characters are

applied to the scale values.

Linear Scaling

When performing computation on a channel that has linear scaling set, the computation

is performed on the scaled value.

Notes on Computation

Computation is not executed when you change Start Point or End Point while the

computation is stopped. Be sure to press Exec to perform the computation again. If you

do not, the waveform will not be displayed correctly when the screen is redrawn.

Note

While computation is in progress,

is displayed at the upper left of the screen.

10.1 Adding, Subtracting, Multiplying, and Dividing Waveforms

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды