YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 63

Страница: 63 / 589

2-32

IM 701240-01E

Action-on-Stop «For procedures, see section 7.6.»

A specified action can be carried out when the waveform is displayed after acquiring the

specified record length of data after the measurement is started or when measurement is

stopped. The following five types of actions are available.

Print the Screen Image Data (PRINT)

Prints the screen image to a specified printer.

Save the Screen Image Data (Image)

Saves the screen image data to the save destination specified in the IMAGE menu.

Save Waveform Data (Save to File)

Saves the waveform data in binary, ASCII, or floating format to the save destination

specified in the FILE menu.

Beep Sound (Buzzer)

Sounds a buzzer.

Send Mail

Sends an e-mail message to a specified address (when Ethernet interface option is

installed).

Backing Up the Acquisition Memory «For procedures, see section 7.7.»

If the ACQ MEMORY BACKUP switch on the right side panel of the SL1400 is turned

ON, the history memory data in the acquisition memory is backed up even when the

power supply is cut off. The data held in the acquisition memory is backed up

immediately before the power is turned OFF. This function protects the data in the

acquisition memory from sudden power failures.

Alkaline dry cells or nickel hydride rechargeable batteries (four AAA batteries) are

required for the backup. The backup time varies depending on the operating

environment.

For reference values of the backup time, see section 18.5.

Display Format and Waveform Mapping «For procedures, see section 8.1.»

Display Format

Waveforms can be displayed in divided windows to facilitate the viewing of multi-channel

waveforms and computed waveforms.

Waveform Mapping

You can select the mapping of the input channels to the divided windows from the

following:

Auto:

The input channels whose display is turned ON are assigned in order by the

channel numbers.

Fixed:

Waveforms are assigned in order from the top regardless of whether the input

channel display is turned ON/OFF.

User:

The channels can be assigned arbitrarily to the divided windows regardless of

whether the input channel display is ON/OFF.

2.4 Setting Waveform Acquisition Conditions and Display Conditions

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды