YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 198

Страница: 198 / 589

6-10

IM 701240-01E

When Measuring Temperature

Range

Resolution

K, E, J, T, L, U, N, R, S, B, W

0.1

Au7Fe

0.1 K

Trigger Slope

Select how the trigger source is to cross the specified level for activating the trigger from

the following three choices.

Activated when the trigger source changes from below the trigger level to above

the trigger level (rising).

Activated when the trigger source changes from above the trigger level to below

the trigger level (falling).

Activated on either a rising edge or falling edge.

Trigger Hysteresis

Sets a width to the trigger level so that triggers are not activated by small changes in the

trigger signal. Select the trigger hysteresis from the following three types.

When Measuring Voltage

Approximately

0.1 division of hysteresis around the trigger level.

Approximately

0.5 division of hysteresis around the trigger level.

Approximately

1 division of hysteresis around the trigger level.

When Measuring Temperature

Approximately

0.5

C (K)

Approximately

C (K)

Approximately

C (K)

When Measuring Strain

Hysteresis of approximately

2.5% of the range around the trigger level.

Hysteresis of approximately

12.5% of the range around the trigger level.

Hysteresis of approximately

25% of the range around the trigger level.

When Measuring Acceleration

Hysteresis of approximately

0.1 divisions of the range around the trigger level.

Hysteresis of approximately

0.5 divisions of the range around the trigger level.

Hysteresis of approximately

1 divisions of the range around the trigger level.

When Measuring Frequency and Other Parameters on the Frequency
Module

Hysteresis of approximately

0.01 divisions of the range around the trigger level.

Hysteresis of approximately

0.5 divisions of the range around the trigger level.

Hysteresis of approximately

1 divisions of the range around the trigger level.

Trigger is activated (When set to rising edge )

Hysteresis width

Trigger level

Hold Off

See section 6.4.

6.5 Setting the Edge Trigger (SIMPLE)

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя, Страница: 198 / 589

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы: