9-4
IM 701240-01E
Setting the Acquisition Mode
By default, the acquisition mode in Chart Recorder mode is set to envelope. If you
want to select the acquisition mode between normal and envelope, carry out the steps
below.
1.
Press
MENU
.
2.
Press the
Next 1/2
soft key.
3.
Press the
Others
soft key.
4.
Press the
Next 1/2
soft key.
5.
Press the
Chart Recorder Sample
soft key to select the acquisition mode.
Explanation
Chart Speed
You can select the chart speed from below.
10 mm/h, 20 mm/h, 25 mm/h, 50 mm/h, 100 mm/h, 1 mm/min, 2 mm/min, 5 mm/min,
10 mm/min, 20 mm/min, 25 mm/min, 50 mm/min, 100 mm/min, 1 mm/s, 2 mm/s,
5 mm/s, 10 mm/s, or 20 mm/s
You can change the chart speed even while the recording is in progress. However, the
waveform acquired in the internal memory up to that point is cleared.
Display Position of the Chart Speed and Acquisition Mode
The specified chart speed and acquisition mode are displayed at the upper right of the
screen.
• While the recording is in progress, the horizontal scale (time per division) for T-Y
waveform recording is displayed below the chart speed (bottom row).
• If you change the chart speed when the recording is stopped, the bottom row
displays the new chart speed. The new chart speed takes effect the next time you
start the recording.
Acquisition mode
Env (Envelope)
Normal
Top row:
Chart speed
Bottom row: Horizontal scale (time per division) for T-Y recording
If you change the chart speed while the
recording is stopped, the bottom row
displays the new chart speed.
9.2 Setting the Record Conditions of T-Y Waveform Recording
