YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 251

Страница: 251 / 589

7-15

IM 701240-01E

App

Index

Waveform Acquisition

File Name When Action Is Set to Image or Save to File

If the Auto Naming of the IMAGE menu or the FILE menu is OFF, numbers are

automatically assigned to the file names. Otherwise, the file is saved using the specified

method.

For details, see section 13.8 or 13.12.

Send Mail Operation

Sends e-mail messages to the address specified by pressing MENU and selecting

Next 1/2 > Network > Mail Setup > Mail Address.

Setting the Execution Mode of the Action-on-Stop at Power ON (Action

Mode(Power On))

You can select whether to enable action-on-stop at power-on. Turn this ON if you want to

continue the action-on-stop operation after a power failure.

ON:

At power ON, the action-on-stop is set to the mode that was used when the

power was turned OFF.

OFF: Action Mode is turned OFF at power ON.

The default setting is OFF.

Notes When Using the Action-on-Stop

• Action-on-stop cannot be used if the acquisition mode is Average.

• You cannot change the settings while the action-on-stop is in progress.

• The action-on-stop operation may slow down if there is access from the network while

the following action is in progress.

Printing/saving of the screen image data and saving of the waveform data

• You cannot use action-on-stop when the realtime recording to the internal hard disk is

ON.

Notes When Action Is Set to Image or Save to File

• Do not specify the root directory of the medium as the save destination directory.

(Only up to 512 files can be saved to the root directory of a medium that has been

formatted using the SL1400.)

• The maximum number of files that can be created in a single directory is 5000. Do not

place files in the save destination folder before starting the action-on-stop operation.

• If you select Image and Save to File simultaneously, separate the folders specified by

the IMAGE menu and the FILE menu.

• If you select Numbering for the file name assignment method (Auto Naming) in the

IMAGE menu and the FILE menu, the creation of files takes an extended period when

the number of saved files becomes large. When creating more than 2000 files, select

Date for Auto Naming.

• When 5000 files are saved, the action-on-stop operation ends.

7.6 Setting the Action When Waveform Display Is Updated (Action-on-Stop)

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды