YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 501

Страница: 501 / 589

17-5

IM 701240-01E

App

Index

Troubleshooting, Maintenance, and Inspection

Errors in Setting (800 to 899)

Code

Message and Corrective Action

Section

800

Illegal date-time. Set the correct date and time.

3.6

801

Illegal file name. The file name contains characters which are not allowed or the file name is not

Chapter 13

a valid MS-DOS file name. Enter another file name.

803

Turn off accumulate mode to enter history menu. It is not possible to activate the history menu

8.4

by pressing the HISTORY key during accumulation.

804

Cannot change this parameter while running. Press the START/STOP key to stop acquisition.

7.1

808

Can not be specified at the current record time setting.

5.2,
Appendix 1

809

Cannot change edge for status other than X.

Chapter 6

Set the state of the channel corresponding to condition A to ‘X’.

811

Cannot change display points in roll mode.

5.2

813

Set Items in measure menu. Set appropriate measurement items.

11.5

814

Duplicated Name. Change the label string.

8.10

816

Cannot turn off with the current record length. Please Change record length.

5.2

817

Cannot change. Please change X Trace in the X-Y menu.

8.6

819

Cannot change when Channel Display is OFF or Math settings are invalid.

5.1,

Set the channel display ON or make appropriate Math settings.

Chapter 10

821

Cannot change when External Clock is active.

5.20

823

Cannot change while running. Set the acquisition mode to Normal.

7.1, 7.2

824

Cannot change with the current acq mode.

7.2

829

Cannot change when Logic Mode is OFF or all bits of Logic Display are OFF.

5.18

834

Duplicate SCSI ID. Set different ID numbers.

13.7

835

Cannot change settings while realtime printing or realtime recording.

7.5

Stop printing or recording.

836

Cannot change settings during Action On Trigger. Stop the Action On Trigger.

6.18

837

Cannot set the channels which do not have modules installed.

–

838

Cannot set the channels which do not have the strain module installed.

–

839

Cannot Set or Execute.

–

840

If the trigger mode is set to Single, Single (N), or LOG, the acquisition mode cannot be set to

6.1, 7.2

Average.

843

If the acquisition mode is Average, the trigger mode cannot be set to Single, Single (N), or Log.

6.1, 7.2

844

It can’t be set at the time of the roll mode.

5.2

845

The trigger mode cannot be set to Single(N) during the roll mode.

5.2, 6.1

850

The acquisition mode cannot be set in the current record length.

5.2,
Appendix 1

851

Computation cannot be carried out at the current record length.

5.2, 10.3

855

Cannot be configured or executed during the history search operation.

11.2, 11.3

856

The record cannot be selected.

11.1 to 11.3

857

History record does not exist.

11.1 to 11.3

858

Cannot be configured or executed while computation is in progress.

11.1 to 11.3

Aborted when history display mode is set to One.

859

It can’t be set up or be carried out in the Preview mode.

12.1

Choose Quit, and cancel the Preview mode.

860

Cannot be configured or executed while updating the history all display.

11.1 to 11.3

Aborted when history display mode is set to One.

861

This format cannot output with color.

12.2, 12.3

868

Processing statistics.

11.6

To perform other operations, abort the statistical processing.

869

The channel which couldn’t be set up was specified.

Chapter 11,
13.8

870

Cannot be set when the acquisition mode is set to average.

7.2

872

Cannot be set during realtime recording.

7.5

17.2 Messages and Corrective Actions

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя

Результаты поиска

Содержание SL1400 ScopeCorder LITE

Отзывы:

Похожие инструкции для SL1400 ScopeCorder LITE

Бренды по названию

Популярные бренды