manualshive.com logo in svg

YOKOGAWA SL1400 ScopeCorder LITE, Руководство пользователя, Страница: 451 / 589

Поделиться
Скачать
YOKOGAWA SL1400 ScopeCorder LITE Скачать руководство пользователя страница 451

15-10

IM 701240-01E

Note

•

An FTP server software must be running on the PC or workstation to which the SL1400 is
to be connected. In addition, the following points need attention regarding the server
program settings.

•

Set the list output (string returned by the dir command) to UNIX format.

•

Set the home directory and its subdirectories to allow writing.

•

The client cannot move above the home directory.

•

The newest file is not necessarily displayed at the top of the file list.

•

Files and directories that are longer than 17 characters cannot be accessed.

•

Depending on the server, “<..>” that indicates a higher directory may not be displayed.

•

The time information in the file list will not be displayed correctly for the following cases.
•

On Windows NT when the time stamp is displayed using am and pm.

•

Servers that return characters other than ASCII characters in the list

•

The following operations are not possible.
•

Turning file protect ON and OFF on saved files.

•

Formatting a network drive.

•

Copying between network drives.

•

Renaming a file on the network.

•

This function cannot be used when using the FTP server function or the Web server
function.

•

To use this function, you must configure TCP/IP according to the procedure given in
section 15.2.

•

To apply new settings that are made while connected to a network drive, drop the
connection using Disconnect and reconnect.

•

If you are disconnected by the server when using the FTP client, you will be automatically
reconnected if you perform a file operation. This also hold true, if the network drive is
selected for Save to File when using an action trigger.

Explanation

You can save the screen image data, waveform data, and setup data to network drives

via the Ethernet network in the same fashion as with the PC card interface.

If you want to make the SL1400 the FTP server and access the SL1400 from an FTP

client on the network, see section 15.6.

FTP Server

Enter the IP address of the FTP server (the PC or workstation running the FTP server)

on the network to which waveform and setup data will be saved. On networks supporting

DNS, you can specify the host and domain by name instead of the IP address.

Login Name

Enter the login name using up to 15 characters. The default setting is “anonymous.”

The characters that can be used are all the ASCII characters on the keyboard.

Password

Enter the password corresponding to the login name using up to 15 characters.

The characters that can be used are all the ASCII characters on the keyboard.

Time Out

When an FTP server is accessed from the SL1400 and data is not transmitted for a

certain period of time (timeout time), the SL1400 decides that the transmission to the

FTP server is not possible and closes the connection. You can set the timeout value in

the range of 0 to 3600 s. The default setting is 15 s.

15.3  Saving/Loading Data to a Network Drive (FTP Client Function)

Содержание SL1400 ScopeCorder LITE














































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов