Xylem sensus AutoRead Скачать руководство пользователя

Страница: 19 / 161

Set up the Ethernet Cradle

1. The Ethernet dock is a freestanding desktop base. It can also be mounted to a

horizontal surface like a desk or shelf. To mount the dock, drill three holes in a horizontal

line 10 7/8” (27.65 cm) apart up through the mounting surface. Screw #6-32 screws up

into the threaded holes in the dock’s bottom base plate. Note: The screws should not

penetrate the dock more than 1/4”.

2. Handhelds must have a docking I/O module. The lower right side of the module has

docking pin contacts.

If you have a standard I/O module, replace it with a docking I/O module. Follow the

instructions included with the kit.

3. Attach the AC power cord to the power adapter. Plug the power cord into an AC power

supply and the power adapter into the power input jack on the dock. This provides

power to the dock and charges handhelds. The green LED turns on when power is

applied.

4. If a handheld has a connector protector, open it to reveal the connector ports. Pull it

back as shown below.

5. To insert a handheld, hold it so the connector ports are at the bottom and the keypad is

facing forward. Insert the handheld into the dock as shown below so it is firmly seated.

The handheld automatically turns on.

2 Before Using AutoRead | 19

Содержание sensus AutoRead


































































































































































Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды

Xylem sensus AutoRead, Руководство пользователя

Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды