Xylem sensus AutoRead Скачать руководство пользователя

Страница: 85 / 161

Add Readings and Notes to Meters in AutoRead

In AutoRead version 5.xx and later, it is possible to add a reading or note to an account

after the meters have been processed from the HHD, or Vehicle device. In other words, if

the meter reader has finished reading, and the readings have been read from the HHD or

Vehicle into AutoRead, but have not yet been transferred to billing, it is possible to add a

reading or note to an account from within AutoRead. It is no longer necessary to perform all

re-reads via the HHD or Vehicle devices themselves or edit the readings only after they have

been sent into billing. This can be useful if there are just a few readings to add, and you do

not wish to have to use the HHD to enter the readings. A user can always add readings

directly to the billing software after readings are taken on the meter reading system, but now

AutoRead allows readings to be added from within the AutoRead software as well.
In order to add reading transactions to accounts from within AutoRead, the route must be

in a Backup Required (Data: Available) or Complete (Data: Available) status. In order to be

in one of these two statuses, the route and reading data must have already been read from

the HHD or Vehicle device into AutoRead using the Read Data function.

Add a Reading or Notecode to an Account

1. Navigate to the Route Detail screen for the route containing the desired accounts by

double-clicking on the desired route. Alternatively, you can find the route under Route

Processing on the Tree View on the left panel of the screen and click on it.

2. Click on the

Meters

tab to see a list of accounts in this route.

3. Select the desired meter from the list by clicking on it. It is also possible to search for a

meter in the list by right-clicking any meter in the list, and then clicking

Find

. You can

search for a meter by using the Account ID, Meter ID, Address or MID (MXU) ID.

7 Additional Route Processing Options | 85

Содержание sensus AutoRead


































































































































































Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды

Xylem sensus AutoRead, Руководство пользователя

Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды