Xylem sensus AutoRead Скачать руководство пользователя

Страница: 41 / 161

The

Workers

tab provides the preset entries for the HHD work order field Who

Performed Work. The HHD operator must select from one of these presets; they do not

have the option of entering free-form text into this field on the HHD.

Note

The

Workers

tab is blank by default. You must enter you own worker descriptions using

the

Add

button. The workers in the screenshot above have been manually added for the

sake of demonstration.

• Editing Options: The Add, Modify, and Delete options work in the same fashion as those

on the

Notes

tab. Please refer to numbers 38-40 for further information.

Polling Devices - Vehicle

To access the Vehicle Device Parameters, select the Vehicle Protocol in the Tree View on

the left side of the screen. This screen lists the currently added Vehicle Transceiver Units

(VXUs) in the system. In most cases, a utility will have only one VXU, but it may be helpful

for certain reasons to list more than one device in order to allow loading of more than one

VXU route to a disk for the meter readers. Please see Section

7.1

- Load Multiple Routes for

more information. To access the specific parameters for a given VXU device, either double

click the device on the right side of the screen, or select it from the Tree View on the left side

of the screen under Polling Devices-Vehicle.
•

Add

: This control allows a user to add a Vehicle Transceiver Unit (VXU) to the system.

•

Delete

: Allows a user to delete a VXU from the system. A VXU that is currently assigned

to a route or is loaded cannot be deleted.

• The

Devices

Tab: This screen displays a list of all currently added VXU devices and

some of the parameters that are set for them.

• The

Notes

Tab: This screen displays a list of the pre-defined note codes that are

currently available for the Vehicle protocol, and allows you to make modifications to this

list. See the section on the HHD Notes Tab for information on using this screen.

Note

3 Polling Devices | 41

Содержание sensus AutoRead


































































































































































Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды

Xylem sensus AutoRead, Руководство пользователя

Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды