Xylem sensus AutoRead Скачать руководство пользователя

Страница: 2 / 161

Revision History

Rev No.

Date

Description

Rev 01

07-JAN-2013

Initial Release.

Rev 02

21-NOV-2013

Revisions for version 7.x of software.

Rev 03

28-FEB-2017

Revisions for version 8.x of software.

This document, in whole or in part, (“Document”) includes confidential and proprietary

information belonging to Sensus USA Inc. and/or one of its subsidiaries or affiliates.

Unauthorized use, reproduction, disclosure, distribution, or dissemination of this Document

is strictly prohibited. No party may use, reproduce, disclose, distribute, or disseminate this

Document for any purpose without express written authorization from Sensus USA Inc.

Any use, reproduction, disclosure, distribution, or dissemination of this Document does

not transfer title to, license, or grant any patent, copyright, trademark, or other intellectual

property rights. This Document, and any copies or derivatives thereof, must be returned

immediately on demand. This Document is subject to any applicable non-disclosure

agreement(s). Information in this Document is subject to change without notice and does

not represent a commitment on the part of Sensus.
© Copyright 2017, Sensus. All Rights Reserved.
FlexNet

, AutoRead

, and associated logos are trademarks of Sensus and its subsidiaries

and affiliates. All other brand names may be trademarks of their respective owners.
Sensus
8601 Six Forks Road
Suite 700
Raleigh, NC 27615
1-800-638-3748
www.sensus.com
Document: AutoRead User Guide
Document Number: AUG-10030-03

Revision History | ii

Содержание sensus AutoRead


































































































































































Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды

Xylem sensus AutoRead, Руководство пользователя

Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды