Xylem sensus AutoRead Скачать руководство пользователя

Страница: 39 / 161

•

High Pressure Shutoff Threshold

: Value to be used as the maximum acceptable

pressure threshold value if using the High and/or Low Pressure Shutoff options. Valid

values range from 0.0-28.0 for each option; however, the values most follow a logical

value range for each succeeding option. Low Pressure Shutoff Threshold should be less

than or equal to the Low Pressure Warning Threshold which should be less than or equal

to the High Pressure Warning Threshold which should be less than or equal to the High

Pressure Shutoff Threshold value.

HHD Notes Tab

The

HHD Notes

Tab displays a list of the current pre-defined note codes that are available

to the meter reader on the HHD. This list will control the pre-defined notes that are available

on all the HHDs. Changes to this list will only take effect on the HHD the next time the unit is

loaded.
•

Add

: The

Add

button allows you to add a notecode to the list of pre-defined note codes.

It is necessary to highlight one of the existing note codes before this button will become

active. When

Add

is pressed, you are prompted for a note reference number (seen to

the left of the note text on the screen), the note text, and whether or not you would like

to include this note in the export file if it is entered by the meter reader. In some cases,

there will be certain notes (or none of them) that would be desirable to export to billing

(for example, if the billing system generates work orders based on note codes). The

meter reader can add free form notes at any time (as long as the Enable Text Notes

option is checked on the HHD tab), but pre-defined notes can only be added to the

system here.

•

Modify

: The

Modify

button allows you to modify an existing pre-defined note code in

the system. Highlight the note that needs to be modified, click the

Modify

button, and

change the text description in the box provided.

Note

If modifying a note, only the Text and Include in Export options may be changed. If you

wish to change the note number as well, it is necessary to delete the note entirely and

add in a new one.

•

Delete

: The

Delete

button allows you to delete an existing pre-defined note code in the

system. Highlight the desired note code, and click the

Delete

button.

3 Polling Devices | 39

Содержание sensus AutoRead


































































































































































Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды

Xylem sensus AutoRead, Руководство пользователя

Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды