Xylem sensus AutoRead Скачать руководство пользователя

Страница: 122 / 161

followed in the field, the Non Route Meter will appear on the Non Route Exception Report.

The date and time is noted.

Once found on the Non Route Report you can move to the Master Route Report printed

sequentially and will find the Non Route Meter at the correct date and time and see that the

very next entry on the report is a manual entry of the same reading.

You now have the Meter ID that is actually at the address as the Non Route, and the Meter

ID that is in billing on the manually entered line with the account number and address. If

Meter IDs are identical, then the problem is with the Meter Type coming from the Billing

System. If they are different IDs, then you know the correct ID is the Non Route Meter ID.

Not at Displayed Location (Message on HHD)

The

Not at Displayed Location

message means that the HHD found a match for

the Meter ID and Meter Type but it is not at the location currently listed on the display.
• If you were at the wrong address on the HHD display, then press

Shift

Last

, and

. This will move the HHD display to the location where the reading was entered.

If that is the correct location, then pressing the

PageDown

key will move you to the next

address and you may continue reading the rest of the route.

• If you are at the correct address you will first need to manually enter the proper reading

for this location. (The reading can be viewed on the 4090 TouchGun or on the HHD by

pressing

Shift

, then

Last

. After recording the information, press the

ESC

key to get

back to the address.) You will also want to enter a note indicating the correct Meter ID

and Type for that address so that it may be easily corrected back in the office. Once the

reading and note are entered, you will need to find out what account the HHD improperly

recorded this reading for. The TouchPad can be read giving the

Not at Displayed

Location

message again. After the message has displayed, the location the reading

was improperly placed at can be viewed by pressing

Shift

Last

, and then

and

the HHD will move the display to the location the reading was entered at. A note can

then be entered indicating it has the wrong Meter ID and/or Meter Type and the correct

reading re-entered if the location has already been previously read. If the location was

not previously read, it can be corrected when encountered later in the route. In order to

10 Troubleshooting Non-Route Meter IDs | 122

Содержание sensus AutoRead


































































































































































Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды

Xylem sensus AutoRead, Руководство пользователя

Результаты поиска

Содержание sensus AutoRead

Отзывы:

Похожие инструкции для sensus AutoRead

Бренды по названию

Популярные бренды