E6582175
F-26
6
6.5
Signal Output
6.5.1 Output running signal and braking signal (Low-speed signal)
Refer to section 7.2.2 for output terminal function.
f100
: Low-speed signal output frequency
Function
When the output frequency become
f100
or more, an ON signal will be generated. This signal can
be used as an electromagnetic brake excitation/release signal. (Refer to
“
Motors with a brake
”
in
section 1.4.1 for application.)
This signal can also be used as an operation signal when
f100
is set to 0.0Hz, because an ON
signal is put out if the inverter is in output state.
● Output from the relay output terminal RY-RC. (Default)
Output from the terminal FLA-FLB-FLC and OUT are possible by the parameter settings.
[Parameter setting]
Title
Function
Adjustment range
Default setting
f100
Low-speed signal output frequency
0.0 -
fh
(Hz)
0.0
Output frequency
Time [s]
Low-speed detection signal :
OUT-NO terminals
ON
OFF
Inversion of low-speed
detection signal
ON
OFF
[Hz]
0
Setting frequency
Output terminal setting
Low-speed signal (ON signal) is output from RY-RC terminal by default setting.
Change this setting to invert the polarity of the signal.
[Parameter setting]
Title
Function
Adjustment range
Default setting
f130
Output terminal selection 1A (RY-RC)
0-255
(Refer to section 11.7)
4:
LOW (Low-
speed detection
signal)
Setting value 5 is reverse signal.
Note) Set
f132
to output to FLA-FLC-FLB terminals and
f131
to OUT terminal.
Содержание TOSVERT VF-S15 series
Страница 394: ......