Toshiba TOSVERT VF-S15 series, Инструкция по эксплуатации

Страница: 265 / 394

E6582175
G-6
7
7.2.2 Output terminal function (sink logic)
This function is used to output a variety of
signals to external devices from the inverter.
With the logic output terminal function, you can
select from multiple output terminal functions.
Set two types of functions for the RY-RC, OUT
terminal and then you can output when either one
or both of them is ON.
Default settings of slide switch SW1and SW2 are
as follows;
SW1: PLC side, SW2: VIB side and S3 side.
Refer to page B-11 to 13 for details.

Usage
Note1) A chattering (momentary ON/OFF of contact) is generated by external factors of the vibration and the impact,
etc. In particular, please set the filter of 10ms or more, or timer for measures when connecting it directly with
input unit terminal of programmable controller. Please use the OUT terminal as much as possible when the
programmable controller is connected.
VIC FM S3 FLA
RY
FLC FLB VIA CC VIB PP
RC
F CC R NO P24 OUT STO
CC +SU
S2 RES S1
SINK
SOURCE
SW1
PLC
VIB
SW2
PTC S3
S4
[Control terminal block]
Function of FLA, B, C terminals:
Set at parameter
 Note 1)
Function of RY terminal:
Set at parameter

and
f137
Note 1)
Function of OUT terminal:
Set at parameter

and
f138
FLA
FLB
FLC
FL
RC
OUT
NO
RY