E6582175
D-8
4
Set parameters by purpose (Guidance function)
auf
Only parameters required for a special purpose can be called up and set.
To use this function, select parameter
auf
Refer to section 6.1.3 for details.
Reset parameters to default settings
typ
Use the
typ
parameter to reset all parameters back to the default settings. To use this function, set parameter
typ
=
3
or
13
.
Refer to section 4.3.2 for details.
Call saved customer settings
Customer settings can be batch-saved and batch-called.
These settings can be used as customer-exclusive default settings.
To use this function, set parameter
typ
=
7
or
8
.
Refer to section 4.3.2 for details.
Search changed parameters
gru
Automatically searches for only those parameters that are programmed with values different from the default setting.
To use this function, select the
gru
parameter.
Refer to section 4.3.1 for details.
4.3.1
Searching for and resetting changed parameters
gru
: Automatic edit function
Note 1: If you reset a parameter to its factory default, the parameter will no longer appear in
gru
.
Note 2: It may take several seconds to display changed parameters because all data stored in
gru
is checked
against the default settings. To cancel a parameter search, press the MODE key.
Note 3: Parameters which cannot be reset to the default setting after setting
typ
to
3
are not displayed.
Refer to section 4.3.2 for details.
• Function
Automatically searches for only those parameters that are programmed with values different from the default
setting and displays them in the
gru
. Parameter setting value can also be changed while searching.
Содержание TOSVERT VF-S15 series
Страница 394: ......
